Cargo Dry Solutions:
Topsorb is expert of container desiccants, provide perfect cargo dry solutions. Our container desiccant bags create a dry environment in the container, protecting your valuable goods from humidity damage. It can effectively adsorb humidity, and control “dew point” temperature below the actual temperature, and thus prevent mildew, rust formation.
DRY SAP 125g ：Tyvek packaged, the back side is with adhesive function.
It can be pasted onto the pallets or cartons to avoid “Cargo Sweat”.
Absorbent: CaCl2+water adsorption material; Adsorption capacity: 280%~300%
Shelf Life： 24 months from production date(under the right store and unabroken circumstance)
Super Adsorption Capacity
Solid gel & Anti-leakage
Topsorb VS Other CaCl2 powder desiccant
1． Check whether the conatiner is damaged,whether there is a hole or crack on the container wall,the top and bottom.Container doors can be closed tightly and the seal must be good.The container must be dry and clean before loading.
2． Inspeciton of container wood floor.if possible,do not use containers with wood floor humidity over 20%,it would increase the risk of damp.
3． Seal all air-wents on the container wall.Very important!
Desiccant plays an effective role only in a closed enviroment.If the container door is not shut tightly, or there is damage on the container or the air-vents inside are not sealed,desiccant will never be able to absorp up the mositure that continually enteres from outside.
4. Hang Dry Sap and recommended dosage:Open the package and hang dry paste up to the iron hoop on the container wall,as shown in the picture,Use 40bags~48bags per 20’ container,80bags~96bags per 40’ container.For professional advice of desiccant dosage,please contact Topsorb.